Cleaning
SuperClean
Supplied in 5 liter
Concentrated cleaner that removes limescale, rust, cement haze and grout haze.
Multi Coating SuperClean is a concentrated, water-dilutable cleaner that removes limescale, cement haze, salt deposits, grout haze, tile adhesive residue, rust and excess mortar. It penetrates and dissolves deposits that ordinary cleaning leaves behind.
The product is used on concrete, brick, ceramic tiles and natural stone, and is also suited to limescale and rust on sanitary fittings in toilets and changing rooms. SuperClean additionally has a bactericidal effect.
SuperClean is acidic, with pH 2 in concentrate, and that is what makes it effective. It is also why it must not be used on polished marble or slate: the acid dulls such surfaces. Always test on a small area before treating the whole surface.
The product is labelled SuperRens on the container, which is its Norwegian name.
Areas of use
- Façades
- Concrete structures
- Brick
- Ceramic tiles
- Natural stone
- Bathrooms and sanitary fittings
- Changing room facilities
Application guide
What you need
- SuperClean
- Acid-resistant brush, sponge or suitable applicator
- Gloves, safety goggles and protective clothing
- Clean water
- A suitable container if the product is to be diluted
Before you start
Check that the surface can tolerate acidic cleaning.
SuperClean must not be used on polished marble or other acid-sensitive materials.
Protect metal, glass, plants and surrounding surfaces.
Ensure good ventilation indoors.
Important limitations
- Must not be used on polished marble.
- The product must never be mixed with chlorine or other chemicals.
- Never let the product dry on the surface.
How to apply
- Remove loose dirt from the surface.
- Wet the surface with clean water if this is recommended for the material.
- Dilute the product according to the product label and the degree of soiling.
- Apply the mixture in a controlled way to the area to be cleaned.
- Let the product work for the recommended time, but do not let it dry on the surface.
- Work the area gently with a brush or sponge.
- Rinse very thoroughly with clean water.
- Repeat the treatment if needed.
Important to remember
- Always test the material's acid resistance before treatment.
- Always use suitable protective equipment.
- Follow the stated dilution ratio closely.
Safety
This document is currently available in Norwegian only. Contact us if you need assistance with the content.