Get a quote

Protection

Anti Graffiti

Anti Graffiti

Supplied in 25 liter

Water-based microwax that prevents graffiti from penetrating the surface.

Multi Coating Anti Graffiti is a water-based microwax that forms a virtually invisible layer on the surface. The layer is UV-resistant and diffusion-open, so the substrate can still breathe, while spray paint gets no grip and cannot penetrate the pores.

The treatment works as a sacrificial layer. If the surface is tagged, the graffiti is washed off with hot water at 60-90 °C, and it is the wax - not the substrate - that comes away with it. The sacrificial layer therefore has to be reapplied after each removal, while the surface itself remains undamaged.

Anti Graffiti provides up to 8 years of protection. We recommend impregnating the substrate with ConGuard first, so that it is protected against moisture and frost damage during the graffiti removal itself.

Send product enquiry

Areas of use

  • Concrete façades and precast concrete elements
  • Brick and masonry
  • Sandstone, granite and slate
  • Marble
  • Wood
  • Bridges, underpasses and noise barriers
  • Both indoors and outdoors

Application guide

What you need

  • Anti Graffiti
  • Low-pressure sprayer, roller or brush
  • Gloves and suitable protective equipment
  • Covering sheets and masking
  • Cleaning equipment

Before you start

The surface must be clean, dry and free from dust, grease, algae, graffiti and loose particles.

Any damage should be repaired before the treatment starts.

Cover windows, metal, plants and areas that are not to be treated.

Important limitations

  • Do not apply when there is a risk of rain or frost.
  • Avoid direct sunlight and very hot surfaces.
  • Some substrates may show a slight change in colour or gloss.

How to apply

  1. Clean the surface thoroughly.
  2. Let the substrate dry completely.
  3. Stir or turn the product gently.
  4. Apply an even coat with a low-pressure sprayer, roller or brush.
  5. Ensure full coverage without runs or pooling.
  6. Apply several coats if the substrate requires it.
  7. Let each coat dry according to the product instructions.
  8. Protect the area from rain, dirt and contact while it dries and cures.

Important to remember

  • The substrate must be completely clean and dry.
  • The treatment may need renewing once graffiti has been removed.
  • Always test on a small, inconspicuous area first.

Combine

Technical

Safety

This document is currently available in Norwegian only. Contact us if you need assistance with the content.